跳至主要内容

coffee bran pellet production line

评论

此博客中的热门博文

Happy Mid-autumn Festival

Common faults and solutions of pellet machine

Common faults and solutions
Output is low; do not discharge materials Reason: the smoothness of mould hole is poor because of the first use. Mould or roller ages and wears seriously. The moisture of raw materials is too high or too low; the gap between roller and mould is too large; triangular belt ages or slip. Solutions: Grind and lubricate the mould with oil materials. After working for a time, the capacity will increase. Change pinch roller or mould. Adjust the moisture of raw material; tighten the roller bolt. Change the belt. Finished pellets contain much powder Reason: moisture is low; roller and mould wear seriously. Surface of pellets is rough. Reasons: the moisture is too large; mould is used by the first time Solutions: reduce water content; grind with oil materials repeatly. The sound is abnormal Reasons: with hard debris; bearing damages; screws is loose Solutions: stop running the machine to clean; change bearing; tighten the screw Sudden shutdown Reasons: equipment with exc…

The new electronic control equipment workshop of Rotex Master was officially launched

As an important part of the single machine equipment and production line of Shandong Rotex Machinery Co., Ltd., PLC electronic control system has an irreplaceable role in the operation of the equipment. PLC controller is an electronic device designed for digital computing operation in industrial environment. It uses a program-programmable memory that stores instructions for performing operations such as logic operations, sequential operations, timing, counting, and arithmetic operations, and can control each device through digital or analog inputs and outputs. Stand-alone production process for each piece of equipment in the operation and production line.To provide customers with better electronic control system equipment, the company has launched a newly built electronic control equipment assembly and debugging workshop. The workshop covers an area of 800 square meters, including all parts of electronic control system component sorting, electric control cabinet assembly and electron…