跳至主要内容

博文

Common faults and solutions of pellet machine

Common faults and solutions
Output is low; do not discharge materials Reason: the smoothness of mould hole is poor because of the first use. Mould or roller ages and wears seriously. The moisture of raw materials is too high or too low; the gap between roller and mould is too large; triangular belt ages or slip. Solutions: Grind and lubricate the mould with oil materials. After working for a time, the capacity will increase. Change pinch roller or mould. Adjust the moisture of raw material; tighten the roller bolt. Change the belt. Finished pellets contain much powder Reason: moisture is low; roller and mould wear seriously. Surface of pellets is rough. Reasons: the moisture is too large; mould is used by the first time Solutions: reduce water content; grind with oil materials repeatly. The sound is abnormal Reasons: with hard debris; bearing damages; screws is loose Solutions: stop running the machine to clean; change bearing; tighten the screw Sudden shutdown Reasons: equipment with exc…
发表评论
阅读全文
最新博文

The new electronic control equipment workshop of Rotex Master was officially launched

As an important part of the single machine equipment and production line of Shandong Rotex Machinery Co., Ltd., PLC electronic control system has an irreplaceable role in the operation of the equipment. PLC controller is an electronic device designed for digital computing operation in industrial environment. It uses a program-programmable memory that stores instructions for performing operations such as logic operations, sequential operations, timing, counting, and arithmetic operations, and can control each device through digital or analog inputs and outputs. Stand-alone production process for each piece of equipment in the operation and production line.To provide customers with better electronic control system equipment, the company has launched a newly built electronic control equipment assembly and debugging workshop. The workshop covers an area of 800 square meters, including all parts of electronic control system component sorting, electric control cabinet assembly and electron…
发表评论
阅读全文

Advantage of Wood Chipper

1.The rotors of wood chipper machines all passed the dynamic balance testing

2.The motors and transmission shaft is concentric, can ensure the stable running

3.The weight of our wood chipper YGX216 is 5T, more heavy and stable, just put the machine there and can work, not need fixing basis, if light machines, maybe need to dig a hole and fix the base by steel bar and concrete,waste time and money.

4.Our motor is Huali brand 55KW, the best motor in China

5.electricity control system, our cost is very high, and sale at same price as other suppliers

6.The feed inlet size is expanded, diameter of wood can reach to 23cm

7.The material of blade is Manganese steel, not carbon steel, more hard and anti-wearing, it is thick blade, life is long. Even a 8mm iron nails gone inside is no problem.

发表评论
阅读全文

National Holiday

发表评论
阅读全文

Forecasting Industrial Wood Pellet Prices

Delivered Pellet Historical Prices FutureMetrics has estimated the historical delivered (CIF) price of wood pellets from international trade data. Data on the value and quantity of imported pellets gives insight into the prices that buyers are paying for the fuel. Because most of the international trade of pellets is under long-term contracts, those prices reflect a competitive, long-run, market-clearing value. The spot price is influenced by short-term supply and demand imbalances.  If the market is in a state of excess supply, prices fall. If the market in a state of excess demand, prices rise. Long-term offtake agreement prices are based on mutually sustainable values for the pellet fuel. Those prices are unaffected by short-term supply and demand imbalances.  FutureMetrics has estimated CIF prices for several common destinations, including ARA and Japan. The estimates for CIF U.K. are in Figure 1.  Note that the weighted average considers the market share of the exporting countrie…
发表评论
阅读全文

Happy Mid-autumn Festival

发表评论
阅读全文

Russian wood pellet production

Russia currently accounts for approximately 6 percent of world wood pellet exports and currently ranks eighth in the world for total wood pellet production, with 3 percent of total world wood pellet production.
Russia produced approximately 1.75 million metric tons of wood pellets last year, up 32 percent when compared to 2016 production. The increase is attributed to continued strong demand from the European Union and new markets in Asia, including Japan and China.The country exported approximately 1.44 million metric tons of wood pellets in 2017, up 34 percent when compared to 2016. This year, wood pellet exports are expected to reach 1.5 million metric tons. Leading exports destinations for Russian wood pellets include Denmark, South Korea, Belgium and Sweden.By 2020, the report predicts Russian wood pellet production will reach 5 million metric tons per year, increasing to 8 million metric tons by 2025.
10 large wood pellet producers in Russia currently manufacture approximately 60 …
发表评论
阅读全文